Formation of Phosphorylated 3H‐Pyrroles from NefIsocyanidePerkow Adducts and Tosylmethyl Isocyanide

Imidoyl chlorides, generated from isocyanides and acyl chlorides, react with trialkyl phosphites, in a Perkow‐type reaction, to afford 3‐(alkylimino)‐2‐[(dialkyloxyphosphoryl)oxy]acrylates, which undergo a smooth reaction with tosylmethyl isocyanide (TsMIC) to furnish 4‐(alkylamino)‐3‐[(dialkyloxyphosphoryl)oxy]‐5‐[(4‐methylphenyl)sulfonyl]‐3H‐pyrrole‐3‐carboxylates in moderate‐to‐good yields.     

Copper‐Catalyzed Tandem Synthesis of Functionalized Sulfonyl‐yn‐imines from Sodium Arylsulfinates,Trichloroacetonitrile, and Terminal Alkynes

A one‐pot synthesis of functionalized sulfonyl‐yn‐imines via a Cu‐catalyzed tandem reaction of sodium arylsulfinates, trichloroacetonitrile, and terminal alkynes has been developed.     

Use of alpha spectrometry for analysis of U-isotopes in some granite samples

The present study aims to use the ??-spectrometry, at NMA. A radiochemical technique [1, 2] for analysis of U-isotopes was carried out for some granite samples from Gabal Gattar and El Missikat localities and also for some reference soil samples of IAEA. Several steps of sample preparation, radiochemical separation, and source preparation were performed before analysis. The concerned sample was leached by HNO₃, HF and H₂O₂ acids after ashing. The ashed sample was spiked with uranium tracer (²³²U) for chemical yield and activity calculation. Then uranium was extracted from the matrix elements with trioctylphosphine oxide (TOPO) and stripped with 1 M NH₄F/0.1 M HCl solution. The uranium fraction was purified by co-precipitation with LaF₃ to ensure complete removal of thorium and traces of resolution degrading elements. This was followed by a final clean-up step using an anion exchange. The pure uranium fraction was electrodeposited on a stainless steel disc from HCl/oxalate solution. The obtained results from the soil reference samples indicate general similarities between the techniques of ??-spectrometers of NMA, EAEA and IAEA for analysis of U-isotopes. The U-isotopes in the granite samples of high radioactivity levels need more attempts after dilution process to be in the limit detection of ??-spectrometry.     

Analysis of mucosal mucins separated by SDS-urea agarose polyacrylamide composite gel electrophoresis

Efficient separation of mucins (200 kDa-2 MDa) was demonstrated using gradient SDS agarose/polyacrylamide composite gel electrophoresis (SDS-AgPAGE). Inclusion of urea (SDS-UAgPAGE) in the gels casting were shown to have no effect on the migration of mucins in the gel and allowed casting of gel at room temperature. This simplified the procedure for multiple casting of agarose polyacrylamide gradients and increased reproducibility of these gels. Hence, the implementation of urea makes the technique applicable for high throughput isolation and screening of mucin oligosaccharides by LC-MS after releasing the oligosaccharides from isolated, blotted mucin subpopulations. It was also shown that the urea addition had no effect on other supporting applications such as western and lectin blotting. In addition, identification of the mucin protein after tryptic digestion and LC-MS was possible and no protein carbamylation due to the presence of urea in the gel was detected. LC-MS software developed for metabolomic analysis was used for O-linked oligosaccharide detection and differential display of various mucin samples. Using this method, heterogeneous glycosylation of mucins and mucin-type molecules isolated by SDS-AgPAGE and SDS-UAgPAGE was shown to consist of more than 80 different components in a single band, and in the extreme cases, up to 300-500 components (MUC5B/AC from saliva and sputum and). Metabolomic software was also used to show that the migration of mucin isoforms within the gel is due to heterogeneous size distribution of the oligosaccharides, with the slower migrating bands enriched in high-molecular-weight oligosaccharides.     

Separation and determination of arsenic species in water by selective exchange and hybrid resins

A simple and efficient method for separation and determination of inorganic arsenic (iAs) and organic arsenic (oAs) in drinking, natural and wastewater was developed. If arsenic is present in water prevailing forms are inorganic acids of As(III) and As(V). oAs can be found in traces as monomethylarsenic acid, MMA(V), and dimethylarsenic acid, DMAs(V). Three types of resins: a strong base anion exchange (SBAE) and two hybrid (HY) resins: HY-Fe and HY-AgCl, based on the activity of hydrated iron oxides and a silver chloride were investigated. It was found that the sorption processes (ion exchange, adsorption and chemisorptions) of arsenic species on SBAE (ion exchange) and HY resins depend on pH values of water. The quantitative separation of molecular and ionic forms of iAs and oAs was achieved by SBAE and pH adjustment, the molecular form of As(III) that exists in the water at pH <8.0 was not bonded with SBAE, which was convenient for direct determination of As(III) concentration in the effluent. HY-Fe resin retained all arsenic species except DMAs(V), which makes possible direct measurements of this specie in the effluent. HY-AgCl resin retained all iAs which was convenient for direct determination of oAs species concentration in the effluent. The selective bonding of arsenic species on three types of resins makes possible the development of the procedure for measuring and calculation of all arsenic species in water. In order to determine capacity of resins the preliminary investigations were performed in batch system and fixed bed flow system. Resin capacities were calculated according to breakthrough points in a fixed bed flow system which is the first step in designing of solid phase extraction (SPE) module for arsenic speciation separation and determination. Arsenic adsorption behavior in the presence of impurities showed tolerance with the respect to potential interference of anionic compounds commonly found in natural water. Proposed method was established performing standard procedures: with external standard, certified reference material and standard addition method. Two analytical techniques: the inductively coupled plasma mass spectrometry (ICP-MS) and atomic absorption spectroscopy-hydride generation (AAS-GH) were comparatively applied for the determination of arsenic in all arsenic species in water. ICP-MS detection limit was 0.2 μg L⁻¹ and relative standard deviation (RSD) of all arsenic species investigated was between 3.5 and 5.1%.     

Reaction of Primary Alkylamines,Heterocumulenes, and Isatoic Anhydride,Catalyzed by Magnetic Fe3O4 Nanoparticles in H2O

An efficient protocol for the one‐pot reaction of isatoic anhydride (=1,2‐dihydro‐4H‐3,1‐benzoxazine‐2,4‐dione), primary alkylamines, and heterocumulenes (isothiocyanates and isocyanates) in H₂O catalyzed by magnetically recoverable Fe₃O₄ nanoparticles is described.     

Spectral investigation of the intramolecular charge-transfer in some aminotriazole Schiff bases

3-Amino-1,2,4-triazole Schiff bases were reported to contain intramolecular charge-transfer. The enhancing and depressing effects were remarkable as the substituent was changed from electron-donating to electron-withdrawing groups. The path of the resonating delocalization was reversed in the case of the p-NO2 group. To validate these results we effectively used Weinhold et al's natural bond orbital analysis to assess the UV and FT-IR spectrophotometric monitoring of the change reflected in this phenomenon when the substituent in the benzene ring is altered. The NBO analysis was simulated by ab inito computations at the HF/6-31G(d) level of theory, in order to properly detect any possible presence of a hydrogen bond association. The changes occurring in electron occupancies of double-centered bonds, antibonding orbitals and in lone-pair orbitals appraised the results, as did the s and p character listings of the two-centered bonds and the simultaneous changes occurring in the geometric parameters of the molecules in question. Contrary to its normal preference, in these molecules the nitrogen used sp2 hybrid orbitals for its interaction, housing its electron lone-pair in the third p hybrid orbital. Furthermore, NBO analysis reflected the presence of a very soft intramolecular hydrogen association (C-H?π), labelled by UV and FT-IR assignments, between the benzene and triazole rings in all Schiff bases but p-N(Me)2. The n-π* stabilization energy decreased in the order: p-OH>p-OCH3>p-Cl>p-CH3>H>p-NO2>o-OH. The relation between the band position and Hammett substitution constant is interpreted in relation to the molecular structure.     

Synthesis,Photophysical, and Two‐Photon Absorption Properties of Elongated Phosphane Oxide and Sulfide Derivatives

A series of rod‐shaped and related three‐branched push–pull derivatives containing phosphane oxide or phosphane sulfide (PO or PS)—as an electron‐withdrawing group conjugated to electron‐donating groups, such as amino or ether groups, with a conjugated rod consisting of arylene–vinylene or arylene–ethynylene building blocks—were prepared. These compounds were efficiently synthesized by a Grignard reaction followed by Sonogashira coupling. Their photophysical properties including absorption, emission, time‐resolved fluorescence, and two‐photon absorption (TPA) were investigated with special attention to structure–property relationships. These fluorophores show high fluorescence quantum yields and solvent‐dependent experiments reveal that efficient intramolecular charge transfer occurs upon excitation, thereby leading to highly polar excited states, the polarity of which can be significantly enhanced by playing on the end groups and conjugated linker. Rod‐shaped and related three‐branched systems show similar fluorescence properties in agreement with excitation localization on one of the push–pull branches. By using stronger electron donors or replacing the arylene–ethynylene linkers with an arylene–vinylene one induces significant redshifts of both the low‐energy one‐photon absorption and TPA bands. Interestingly, a major enhancement in TPA responses is observed, whereas OPA intensities are only weakly affected. Similarly, phosphane oxide derivatives show similar OPA responses than the corresponding sulfides but their TPA responses are significantly larger. Finally, the electronic coupling between dipolar branches promoted by common PO or PS acceptor moieties induces either slight enhancement of the TPA responses or broadening of the TPA band in the near infrared (NIR) region. Such behavior markedly contrasts with triphenylamine‐core‐mediated coupling, which gives evidence for the different types of interactions between branches.     

Ill-Posedness of sublinear minimization problems

It is well known that minimization problems involving sublinear regularization terms are ill-posed, in Sobolev spaces. Extended results to spaces of bounded variation functions BV were recently showed in the special case of bounded regularization terms. In this note, a generalization to sublinear regularization is presented in BV spaces. Notice that our results are optimal in the sense that linear regularization leads to well-posed minimization problems in BV spaces.     

Reaction between alkyl isocyanides and dimethyl acetylenedicarboxylate in the presence of polyhydroxybenzenes. Synthesis of 4H-chromene derivatives

The reactive intermediate generated by the addition of alkyl isocyanides to dimethyl acetylenedicarboxylate was trapped by phenols such as resorcinol, catechol, hydroquinone, pyrogallol, 2,4-dihydroxybenzaldehyde, or 8-hydroxyquinoline to produce highly functionalized 4H-chromenes in fairly good yields.